Ready-made orgone energy blankets and accumulators are not available for sale from either the Orgone Biophysical Research Lab or Natural Energy Works. Please consult the sources given at the above link. OBRL offers educational seminars instructing people how to build their own accumulators, while NEW offers a good set of plans (The Orgone Accumulator Handbook) and the best natural raw materials for building them (see below).

* Steel Wool Reels, 5-Pound Reels, for Building Orgone Accumulator Panels, of medium grade. With steel wool in handy reels you can more easily make full-size accumulator panels, without the bother of unrolling individual steel wool pads or ordering a large quantity of pads when you need only one reel. This steel wool is made with a water soluble oil. We prefer the medium grade to anything finer because it allows the trace oil to evaporate more easily when placed in the hot sun -- which may not be necessary for sealed orgone accumulator panels, but is a good idea for orgone blankets. One 5-pound reel yields a long band of compressed steel wool measuring approximately 100 feet long by 4 inches wide. The 4 inch wide thickness can be separated into thirds (and sometimes fourths) to triple the surface area. Three 5-pound reels are sufficient to make a 3-ply human-sized standing accumulator. Sold only in full reels.

NOTE: Oils are used in the cutting process which sometimes is found as a residue on the steel wool. This is not a problem for orgone accumualtor panels, which are sealed, but may pose problems for orgone blanket construction. We always try to provide steel wool which is as "oil-free" as possible, we cannot control this quality factor of manufacturing. For orgone blanket construction, we therefore advise to unreel the steel wool and drape it over an outdoor clothes-line or chairs for a day or two, to expose it to direct hot sunlight before making your orgone blanket. This will eliminate most of any remaining oil residue which might otherwise be absorbed into and stain the organic layers of an orgone blanket. This same problem applies, to a lesser degree, for steel wool as purchased in individual small pads (below).
5-Pound Steel Wool Reel (above) - $59.95 per reel.

* Steel Wool Pads, Fine, 16 pre-cut pads in each bag, available in quantities of 5.2 pounds (12 bags), or 2.6 pounds (six bags). Great for smaller projects such as single or multiple orgone blankets.

Each bag contains 16 pads, and each pad when unfolded and spread out (for orgone-accumulator or blanket purposes) can cover an area of about 6" x 12", to cover approximately one-half square foot. So each bag of 16 pads can cover a total area of around 8 square feet.

The graphic above shows the original 4" width pad unfolded, then spread out into 5" or 6" widths.

Full Order: approx. 5.2 Pounds of Steel Wool Pads in Twelve Bags: Each bag has 16 pads. Full Order covers approximately 96 sq.ft. in total when unrolled and spread out.

$54.95

Half Order: approx. 2.6 Pounds of Steel Wool Pads in Six Bags: Each bag has 16 pads. Half Order covers approximately 48 sq.ft. in total when unrolled and spread out.

$29.95

How Much Do I Need, to make an orgone accumulator or blanket?
The answer to this question depends upon what you want to build. If you are new to orgonomy, the science of orgone energy functions in nature, then you should start by making only an orgone blanket, of about 3 ply, measuring around 3-foot by 3 foot. A Half Order of 2.6 pounds, or six bags of steel wool, will be sufficient to cover 48 sq. ft of steel wool surfacing, when spread out to a 6" width, as seen in the photos. Each bag contains 8 sq. ft. of coverage, what is required for one steel-ply layer of a 3' x 3' orgone blanket, assuming a 1" hem edge. So the six bags will provide enough for two such 3-ply blankets. The larger steel wool reels are best for making orgone accumulator panels for a full sized orgone box accumulator, as it can be cut into much longer pieces.

To make larger orgone accumulator panels, the Full Order of 5.2 pounds, in multiple units, is recommended. The Full Order covers approximately 96 sq.ft. in total, enough to fill several orgone accumulator panels. In example a 3-ply orgone accumulator panel measuring 3' x 5' will have an approximate interior space of 15 sq. ft. which will for 3 plys require 45 sq.ft of steel wool (for 3 plys). 12 bags of steel wool would give enough steel wool, when spread out (see the photos) to make two such panels. For a full accumulator big enough to sit in, of 3-plys, figure three times the Full Order quantity, or 15.6 pounds.

NOTES:

For those new to orgonomy, the science of orgone energy functions in nature, we highly recommend to get and read Dr. DeMeo's Orgone Accumulator Handbook, which covers the construction, safe use and storage-maintenance of the blanket. See below for information on the book.

Oils are used in the cutting process which sometimes is found as a residue on the steel wool. This is not a problem for orgone accumualtor panels, which are sealed, but may pose problems for orgone blanket construction. We always try to provide steel wool which is as "oil-free" as possible, we cannot control this quality factor of manufacturing. For orgone blanket construction, we therefore advise to unreel the steel wool and drape it over an outdoor clothes-line or chairs for a day or two, to expose it to direct hot sunlight before making your orgone blanket. This will eliminate most of any remaining oil residue which might otherwise be absorbed into and stain the organic layers of an orgone blanket. This same problem applies, to a lesser degree, for steel wool as purchased in individual small pads

* Acrylic Felt.

We now have a new supplier for Acrylic Felt, in pre-cut lengths of 36" x 72". To make a 3-ply orgone blanket measuring 36" x 36", you need two such pieces of our felt. Three layers of steel wool are then sandwiched in between the four layers of felt, so that felt is on both outer sides of the blanket.

Our acrylic felt is available in either Kelly Green or Dark Cobalt Blue.

$29.95

Notes

Acrylic Felt yields a strong and bio-sympathetic orgone energy charge, the only synthetic polymer we offer, and quite different from the usual irritating qualities as found in polyester and other odd synthetics. This could be that acrylic fiber incorporates many water molecules into its chemical structure. Also we are informed, in the factories that produce both acrylic and polyester, the acrylic is said to be a pleasure to work with, does not jam up the machines, and workers do not have to wear special protective clothing or respiratory masks. The opposite is true for polyester fabrics, which is why studies have shown polyester is a biologically negative product to wear as clothing.

We would prefer to offer only felts made of 100% sheeps' wool, but the manufacture of that is now dominated by Chinese factories, and has become quite expensive, as well as chaotic and dishonest. There are many new products that mix polyester into their weave, calling it names like "Dream Wool" with a picture of sheep in the advertising, and little clarity of just what it is made of. Some of this may be due to the fact that the Chinese have taken over much of the wool blanket manufacturing around the world. Even big companies like Pendleton Woolen Mills have their product made in China, even though the wool that is used to make it may come from ranchers in Europe, North America or elsewhere. We only offer products we are 100% sure about. And if there are any mixes of natural fibers with other materials, it will be stated openly.

* Beautiful Virgin Wool Blankets / Throws / Robes
Camp Blankets & Nature Design
Sheep's Wool or Lamb's Wool
PERFECT FOR THE EXTERIOR LAYERS OF HIGHEST QUALITY ORGONE BLANKET CONSTRUCTION
Go to our Wool Blanket Page for photos and information. These blankets are made of the finest materials with and have a good charge all by themselves! The sample at left is the Pendleton Mills vintage camp blanket, but we have others from Faribault Mills, and generic varieties from around the world. We select our blankets exactly for their good charge, and suitability for the outside layer of a large orgone blanket. Also great gift all by itself - take a look.

* 100% Wool Batting, Beautiful and Soft, highly-energetic material all by itself, to use in the construction of Orgone Pillows and Orgone Blankets. We sell a very high quality felt-like wool batting which is approximately 3/8" thick, with a very wonderful soft-warm energetic feeling. This is sturdy material and cannot be easily pulled apart (as with the carded wool), which is necessary for sewing into orgone blanket layers. Most wool batting is NOT a true felt nor even "felt-like", but is simply carded wool which is too flimsy for orgone blankets. Also, some "wool felt" available in fabric stores is actually a wool-polyester mix, which is not suitable for orgone blankets. We specifically select our materials to work best for this specific purpose. It comes in individual pre-cut batts measuring 90" x 36", or 2.5 yards x 1 yard. This size of batt would make the two inside layers for a two-ply orgone blanket measuring 36" x 45". Or, purchase additional batts and make your orgone blankets as big and with as many layers as you want. NOTE: This material is not suitable for the external cover of an orgone blanket, which should be composed of an even stronger fiber or true felt material. For that, see our selection of wool blankets as noted above, or the acrylic felt material, below.
$39.95 per individual 90" x 36" pre-cut batt.
OUT OF STOCK, SORRY, NO LONGER AVAILABLE. NEW 100% SHEEP'S WOOL BATTING OR WOOL FELT MATERIAL WILL BE OFFERED HERE AS SOON AS POSSIBLE.

* Carded Sheep's Wool "Fluff" (at right) To Layer Inside Orgone Accumulator Panels. This wonderfully natural carded wool is first cleaned, air-dried, and then carded into clouds of fluffy and resilient fiber that is perfect for stuffing pillows, children's toys, and especially for flat layering with steel wool to make an orgone accumulator or blanket. The carded wool fibres are very strong and cling together, but can be easily pulled apart and "stretched" out into flat sheets of whatever shape and thickness one desires. It is much easier and safer to handle than fiberglass insulation, and also produces a similar high charge when used in an accumulator. We recommend 6 pounds for a human-sized, box-type three-layer accumulator, or 12 pounds for a 5-ply accumulator.
$29.95 per one pound (Increase the pound quantity in the Shopping Cart)
OUT OF STOCK, SORRY, NO LONGER AVAILABLE. NEW 100% SHEEP'S WOOL FLUFF WILL BE OFFERED HERE AS SOON AS POSSIBLE.

ALSO OF INTEREST!

* THE ORGONE ACCUMULATOR HANDBOOK: Wilhelm Reich's Life Energy Science and Healing Tools for the 21st Century, with Construction Plans.
NOW SHIPPING THE 248-PAGE, UPDATED EDITION WITH NEW APPENDIX AND WEBLINKS FOR ADDITIONAL INFORMATION. Click here for more details.

BLUE-GLOWING ASTRONAUT PHOTO ENLARGEMENTS We also offer enlargements of the two best photos of blue-glowing astronauts walking on the Moon, from the original NASA archives. These are full color and suitable for framing. A most unusual gift to educate about the existence of life-energy. Click here for more details.

We only sell those materials known to have a very good bioenergetic orgone-charge, and which are optimally suited for orgone accumulator and blanket construction.

Visitor Count: